Description
AWG#2 (30sq) ～ AWG#28 (0.08sq)
Flat cable processing machine.
| MODEL | C373AF | |
|---|---|---|
| OUTER DIMENSIONS | W430mm ×D510mm ×H265mm | |
| WEIGHT | 33kg | |
| POWER SUPPLY | AC100V～AC240V（Single phase）50Hz/60Hz | |
| POWER CONSUMPTION（100V） | 40W（Rated）215W（Max） | |
| AIR SUPPLY | 9Nℓ/min 0.5MPa※1 | |
| CUTTING LENGTH | 0.1mm～99,999mm | |
| CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 L : indicates a cutting length. | |
| STRIPPING LENGTH | FRONT END | 0.1～47.9mm |
| REAR END | 0.1～47.9mm | |
| APPLICABLE WIRES | TYPE | AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc |
| SIZE | AWG#2（30sq）～AWG#28（0.08sq）※2 | |
| O.D. | ax φ11mm※2 | |
| WIRE FEED SPEED | Variable | |
| CUTTER MATERIAL | Ultra fine particle alloy | |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder | |
※1. Use clean,dry air. ※2. Depending on the wire type.
| Total Length | Pieces |
|---|---|
| 100mm | 2,300 |
| 200mm | 2,100 |
| 300mm | 1,950 |
| 500mm | 1,700 |
| 800mm | 1,450 |
| 1000mm | 1,300 |
| 1500mm | 1,050 |
| 2000mm | 850 |
| 3000mm | 650 |
| 5000mm | 450 |
Core diameter ： 0.75mm
Blade move back ： 0.15mm
Both ends stripping ： 3mm
Setting of speed ： 9
Normal mode
Wire : UL1007／AWG#22
