Description
AWG#7 (10sq) ～ AWG#28 (0.08sq)
Belt feed has evolved the CASTING.
| MODEL | C385A | |
|---|---|---|
| OUTER DIMENSIONS | W716mm ×D430mm ×H266mm | |
| WEIGHT | 44kg | |
| POWER SUPPLY | AC100V～AC240V（single phase）50Hz/60Hz | |
| POWER CONSUMPTION | 35W（Rated）139W（Max） | |
| AIR SUPPLY | 0.06Nℓ/min 0.5MPa※1 | |
| CUTTING LENGTH | 210mm～99,999mm | |
| CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 L : indicates a cutting length. | |
| STRIPPING LENGTH | FRONT END | MAX 1,500mm（ Need halh strip ）※2 |
| REAR END | MAX 210mm（ Need halh strip ）※2 | |
| APPLICABLE WIRES | TYPE | ABS wire, Air bag wire, 2 core shield wire, VSF, IV, KV, UL, Teflon , Glass Wire, etc |
| SIZE | AWG#7（10sq）～AWG#28（0.08sq）※2 | |
| O.D. | Max φ11mm※2 | |
| WIRE FEED SPEED | Variable | |
| CUTTER MATERIAL | Ultra fine particle alloy | |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder | |
※1. Use clean,dry air. ※2.Depending on the wire type.
Processing capacity (Actual data)
Number of processed wires per hour
| Total Length | Pieces |
|---|---|
| 700mm | 891 |
| 1000mm | 769 |
| 1500mm | 628 |
| 2000mm | 530 |
| 2500mm | 458 |
| 3000mm | 405 |
| 4000mm | 327 |
Processing capacity (Actual data)
Number of processed wires per hour
| Total Length | Pieces |
|---|---|
| 500mm | 2,022 |
| 1000mm | 1,263 |
| 1500mm | 918 |
| 2000mm | 726 |
| 2500mm | 598 |
| 3000mm | 507 |
Processing conditions
Both ends stripping ： 60mm
Half-strip length ： 30mm
Setting of speed ： 9
Close time ： 0.1sec
Open time ： 0.1sec
